Filter
Top Products
1 System tour
4
For instance, if 8 GB of memory is installed (four 2 GB DIMMs),
only 4 GB of memory in DIMM 1B and DIMM 1A can be
accessed by the system. Memory in DIMM 2B and DIMM 2A is
reserved as spare DIMMs.
Refer to “Server Management Configuration” on page 103 for
more information about configuring the memory spare or
mirror parameter in the BIOS Setup utility.
Chipset components
•Intel
®
E7520 MCH (Memory Controller Hub)
•Intel
®
82801ER ICH (I/O Controller Hub)
•Intel
®
IOP332 - I/O bridge
Media storage
• 3.5-inch, 1.44 MB floppy drive
• Three 5.25-inch device bays supports:
• 5.25-inch IDE CD-ROM drive
• DDS4 DAT 20 GB or 40 GB tape backup drive
• DAT72 36 GB or 72 GB tape backup drive
• AIT1 35 GB or 91 GB tape backup drive
• DVD-ROM, DVD-RW, DVD combo drive
Additional media storage
• Hot-plug SCSI HDD cage
• Supports up to four Ultra320 SCSI hard disk drives
• Hot-plug SATA HDD cage
• Supports up to four SATA hard disk drives
SCSI controller
•LSI
®
Logic 53C1030 SCSI RAID controller
• Supports two SCSI 68-pin Ultra 320 SCSI connectors
• Supports RAID 1