Filter
Top Products
3 System upgrade
58
10 Connect the CPU fan cable to the CPU fan (0 or 1) connector on the
mainboard. Refer to “Mainboard layout” on page 17 for the
location of the CPU fan connector.
11 Observe the post-installation instructions described on page 40.
Removing the heatsink and CPU
Important: Before removing a CPU from the mainboard, make
sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation procedures
described on page 39.
Warning! The heatsink becomes very hot when the system
is on. NEVER touch the heatsink with any metal or with
your hands.
2 Loosen the four screws that hold the heatsink to the mainboard
(1).
3 Pull out the heatsink from the CPU (2). Place the heatsink upside
down on a flat surface to prevent thermal grease from
contaminating other components.
Note: Wipe off the thermal grease from both the heatsink and
CPU using an alcohol pad.
4 To detach the CPU from its socket, follow the steps below:
(1) Pull the CPU socket retainer lever to the fully open, upright
position (1).