Filter
Top Products
51
Replacing storage devices
The system supports one 3.5-inch and three 5.25-inch internal storage
devices. The system comes pre-installed with a floppy drive and a
CD-ROM drive. The two empty 5.25-inch drive bays allow you to install
additional drives such as another CD-ROM drive or a tape drive. These
provide the system with additional storage capacity.
Replacing the FDD
1 Observe the ESD precautions and pre-installation procedures
described on page 39.
2 Disconnect the IDE and FDD cables from the old drive.
3 Press the release bracket on both sides of the drive carrier (1)
before pulling it out from the chassis (2).