5
RAID on motherboard (optional)
• Dual channel Ultra 320 SCSI channels
• Supports RAID 0, 1, 5, 10 and 50
• Requires RAID-enabler (iButton)
• Requires one 184-pin DDR 400 unbuffered ECC DIMMs for cache
memory
• Supports 128 MB memory module with iTBBU (Transportable
Battery Backup Unit) cache memory
• Support 256 MB or 512 MB memory modules (without battery
backup)
Note: When the ROMB (RAID on motherboard) is enabled, the
onboard SCSI controller will provide full hardware RAID
functionality.
Graphics interface
•ATI
®
Rage XL chipset with 8 MB VRAM
Networking
• Dual onboard Broadcom BCM5721 10/100/1000Base-T Gigabit
Ethernet controller
PCI I/O
• Six PCI bus slots with three separate bus segments:
• Two x4 PCI Express bus slots (with x8 connectors)
• Three 64-bit/100 MHz PCI-X bus slots
• One 32-bit/33 MHz PCI bus slot
Serial ATA port
•Two SATA ports
Baseboard Management controller
• Onboard Hitachi 2168 management controller
• IPMI (Intelligent Platform Management Interface) 1.5 compliant
Service ID
• Front and rear service ID button