Filter
Top Products
Machine Maintenance Procedures 3-11
Base Door Removal 0
Prerequisite:
Battery Pack Removal
1. Locate base door (C) on lower cover as shown in Figure 3-5.
2. Loosen nine (9) captive screws (A).
3. Remove door from lower cover.
Figure 3-5. Lower Cover with Battery
Base Door Installation 0
1. Insert door flanges into slots (B) on lower cover. Refer to Figure 3-5.
2. Secure door to lower cover with nine (9) captive screws (A).
3. Install battery pack.
B
B
A
A
A
A
A
A
A
A
A
C
D