Filter
Top Products
3-14 Machine Maintenance Procedures
DIMM (Dual In-line Memory Module) Module Removal 0
Prerequisite:
Base Door Removal
1. Locate module (C) on lower cover. Refer to Figure 3-6.
2. Push module clips (A) outwards as shown in Figure 3-8.
3. Pull module out of mainboard connector (B).
4. Repeat steps 2 and 3 for remaining modules.
Figure 3-8. DIMM Modules
DIMM Module Installation 0
1. Install module into mainboard connector (B). Refer to Figure 3-8.
2. Push down on module until module clips (A) lock in place.
3. Repeat steps 2 and 3 for remaining modules.
4. Install base door.
A
A
C
B
A
A