Filter
Top Products
3-16 Machine Maintenance Procedures
Slave HDD Door Removal 0
Prerequisite:
Battery Pack Removal
1. Locate slave HDD door (D) on lower cover. Refer to Figure 3-5.
2. Loosen two (2) captive screws (A) as shown in Figure 3-10.
3. Remove door from lower cover.
Figure 3-10. Slave HDD Door
Slave HDD Door Installation 0
1. Insert door flanges into slots (B) on lower cover. Refer to Figure 3-10.
2. Secure door to lower cover with two (2) captive screws.
3. Install battery pack.
A
A
B
B