Filter
Top Products
3-26 Machine Maintenance Procedures
LCD Module Installation 0
1. Install LCD module on chassis.
2. Install and secure six (6) screws (E) (M2.0*3.0-I) to chassis. Refer to Figure 3-22.
3. Put WLAN antenna cable down through upper cover and put all cables in correct guides.
Refer to Figure 3-21.
4. Put adhesive tape holding WLAN cable (C) on upper cover.
5. Connect arcade module power (A) LVDS ( B), WLAN (C), and power module cable (D) to
mainboard connectors.
6. Install hinge covers (B). Refer to Figure 3-20.
7. Install and secure two (2) screws (A) (M2.5*4.0-I) to chassis.
8. Flip computer over onto LCD cover. Refer to Figure 3-14.
9. Connect WLAN antenna cables (A) to WLAN module connectors. Refer to Figure 3-19.
10. Install keyboard module.