Filter
Top Products
Machine Maintenance Procedures 3-17
Slave HDD Module Removal 0
Prerequisite:
Slave HDD Door Removal
1. Locate module (B) on lower cover. Refer to Figure 3-6.
2. Disconnect module connector (A) from mainboard as shown in Figure 3-11.
3. Lift module from module bay.
4. Disconnect module connector (B) from module.
Figure 3-11. Slave HDD Module
Slave HDD Module Installation 0
1. Connect module connector (B) to module. Refer to Figure 3-11.
2. Place module into module bay.
3. Connect module connector (A) to mainboard.
4. Install slave HDD door.
B
B
A
A