Filter
Top Products
3-36 Machine Maintenance Procedures
NOTE:
NOTE
:
The LAN module FFC is part of the lower cover FRU (Field Replacement Unit)
component. Do not remove it.
4. Remove screw (D) (M2.5*6.0-I) from lower cover.
5. Remove module from lower cover.
LAN Module Installation 0
1. Install module (A) on lower cover. Refer to Figure 3-31.
2. Install and secure screw (D) (M2.5*6.0-I) to lower cover. Refer to Figure 3-32.
3. Connect module FFC (A) to mainboard connector (C).
4. Connect module FFC (A) to module connector (B).
5. Install upper cover.