Filter
Top Products
3-44 Machine Maintenance Procedures
Thermal Module Removal 0
Prerequisite:
Mainboard Removal
1. Locate thermal module (B) and heatsink (E) on mainboard. Refer to Figure 3-38.
2. Disconnect module cable from mainboard connector (A) as shown in Figure 3-40.
3. Loosen four (4) captive screws (B).
4. Remove four (4) non-captive screws (C) (M2.5*4.0-I) from mainboard in numerical order
from five (5) to eight (8).
5. Remove three (3) non-captive screws (D) (M2.5*4.0-I) from mainboard.
Figure 3-40. Thermal Module
6. Remove thermal module and heatsink from mainboard.
A
A
B
D
B
B
B
C
C
C
C
D
D