Filter
Top Products
3-18 Machine Maintenance Procedures
ODD (Optical Disk Drive) Module Removal 0
Prerequisite:
Base Door Removal
1. Remove screw (A) (M2.5*6.0-I) from lower cover as shown in Figure 3-12.
2. Remove module (B) from module bay.
Figure 3-12. ODD Module in Lower Cover
3. Remove two (2) screws (C) (M2.0*3.0-I) from module as shown in Figure 3-13.
4. Remove module bracket (D) from module.
5. Remove module bezel (E) from module.
Figure 3-13. ODD Module
B
B
A
D
D
E
E
C
C