Filter
Top Products
Machine Maintenance Procedures 3-25
6. Remove adhesive tape securing WLAN cable (C) to upper cover.
7. Pull WLAN antenna cable up through upper cover.
8. Release all cables from guides.
Figure 3-21. LCD Module Cables
9. Remove six (6) screws (E) (M2.0*3.0-I) from LCD module hinges as shown in Figure 3-22.
Figure 3-22. LCD Module Hinge Screws
10. Remove LCD module from chassis.
CAUTION:
!
Make sure all cables are clear of device to avoid damage during removal.
D
D
B
B
A
A
C
C
E
E
E
E
E
E