Filter
Top Products
Total Access 1240 Installation and Maintenance Practice
5-60 61179605L5-5B
Y-Modem Download Menu
The Y-Modem Download menu (see Figure 5-42) is used to download code stored from a
computer to the Total Access 1240 through the craft port.
Figure 5-42. Y-Modem Download Menu
To download code through the Y-Modem Download menu, perform the following steps:
1. Access the system with System Administrator privileges using a terminal application that
allows file transfers, such as HyperTerminal.
2. Select
Download 1179605L5_A_*** Flash A or Download 1179605L5_B_*** Flash B, and press ENTER.
Code upgrades can involve either Flash A or Flash B or both. The Y-Modem receive utility
begins.
3. If using HyperTerminal, select
Transfer from the menu, and select Send.
4. Navigate to the appropriate location and choose the file that contains the code to be
downloaded.
CAUTION
The code begins transmitting from the terminal emulation package.
When the download is complete, the unit restarts automatically.
NOTE
If downloading both Flash A and Flash B code, repeat steps 3
through 4, choosing the code not previously downloaded.
Total Access 1240 - IPoE Fed 09/01/05 03:56
Unacknowledged Alarms: None
WARNING! THIS IS SERVICE AFFECTING!
If either Flash A or B is selected for update,
service is affected. If Flash B is selected, and code
download completes, the unit will restart itself
to implement the new code.
Y-Modem is the file transfer protocol.
This function cannot be initiated via a telnet
connection (use TFTP instead).
1. Download 1179605L5_A_*** Flash A
2. Download 1179605L5_B_*** Flash B
3. Exit
Selection :
'?' - System Help Screen