Filter
Top Products
61179605L5-5B 4-1
Section 4
Provisioning Defaults
INTRODUCTION
The Total Access 1240 can be provisioned by a set of menus that are accessible through the
DB-9 port, labeled
CRAFT, or through a management VLAN. The initial configuration of the
system must be completed by way of one of these device ports. Once the management VLAN
channel has been established, the system can be remotely managed through Telnet (IP),
SNMP, or Total Access EMS. The Total Access 1240 default settings are shown in Table 4-1
through Table 4-5.
Table 4-1. Bridge User Port Default Provisioning Options
Provisioning Option Available Options Default Setting
Circuit ID 29 character string
VPI 0 to 4096 0
VCI 32 to 65536 35
Priority (PRI) High
MidHigh (MidH)
MidLow (MidL)
Low
Bridge PRI
1High
2MidH
2MidL
4Low
(Port) Enabled/Disabled Enabled
Disabled
Disabled
VLAN ID 1 to 4096 Port Bridge VLAN
11 101
12 102
13 103
14 104
• • • • • • • • •
24 1 193
24 2 194
24 3 195
24 4 196