Total Access 1240 Installation and Maintenance Practice
5-80 61179605L5-5B
SHDSL Loop 1 Status Menu
The SHDSL Loop 1 Status menu (see Figure 5-60) is used to view and reset SHDSL port
status information.
Figure 5-60. SHDSL Loop 1 Status Menu
The SHDSL Loop 1 Status menu fields are described in Table 5-57.
Table 5-57. SHDSL Loop 1 Status Menu Fields
Field LTU Description NTU Description
General Status This field displays the status of
the SHDSL loop. Values include
the following:
•Down
• Training
• Handshaking
•Trained
This field displays the status of
the SHDSL loop. Values include
the following:
•Down
• Training
• Handshaking
•Trained
Payload Rate This field displays the speed of the
data over the SHDSL circuit,
which does not include SHDSL
framing overhead.
This field displays the speed of the
data over the SHDSL circuit,
which does not include SHDSL
framing overhead.
Interface Mode This field displays the interface
mode. Values include the
following:
•2-wire
•4-wire
This field displays the interface
mode. Values include the
following:
•2-wire
•4-wire
09/01/05 03:03
Total Access 1240
SHDSL Loop 1 Status
General Status : Down
Payload Rate : N/A Interface Mode : 2-wire
LTU NTU
Loopback Status : Inactive N/A
SNR Margin(dB) : N/A,N/A,N/A N/A,N/A,N/A (Cur,Min,Max)
Loop Atten(dB) : N/A,N/A,N/A N/A,N/A,N/A (Cur,Min,Max)
ES : 0 0
SES : 0 0
UAS : 1647 0
LOSWS : 1647 0
CVC : 0 0
1. Reset Statistics
Selection:
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help