Filter
Top Products
9
WORK OBSERVING SAFETY REGULATIONS
Before removing safety installations for performance of maintenance and repair work or other work,
measures due to operation must be initiated.
Work observing safety regulations also means to point out faulty behaviour to colleagues and to
notify the offi ce or person responsible about defects detected.
INTENDED USE
CAUTION
The Thyristor Power Controller may only be employed in the sense of its purpose of use (see the
section of the chapter safety instructions under the same name), otherwise hazards for persons (for
instance electrical shock, burns) and systems (for instance overload) may occur.
Any unauthorized reconstruction and modifi cation of Thyro-P, use of spare and exchange parts not
approved by AEG Power Solutions as well as any other use of Thyro-P is not allowed. The person
responsible for the system must ensure that
- hints on safety and operating instructions are available and observed,
- operation conditions and specifi cations are observed,
- protective installations are used,
- required maintenance work is performed,
- maintenance personnel are immediately notifi ed or Thyro-P is immediately put out of commission
if abnormal voltages or noises, higher temperatures, vibrations or similar occur to determine the
causes.
These operating instructions contain all information required by specialists for use of Thyro-P.
Additional information and hints for unqualifi ed persons and for use of Thyro-P outside of industrial
installations are not contained in these operating instructions.
The warranty obligation of the manufacturer applies only if these operating instructions are observed.