Filter
Top Products
User’s Manual 6-3
SOLVING
PROBLEMS
4a.Pull out the tray and raise
the left and right levers of
the feed roller.
Remove the sheet. Pull the
jammed sheet gently not so
as to remain pieces of paper
in the printer.
After removing the sheet,
return the two levers to their
original positions (pull the
levers down toward you).
Notice:
Leaving the two levers raised causes damage to the levers when the
print unit is installed and pressed down.
4b. Remove the sheet.
Caution:
Do not touch the heat roller. This hot area may burn your hand. See
the label attached to the upper door.
Clearing Paper Jams
☞
!
08 Chapter 6 07.08.1997, 11:41 Uhr3