Filter
Top Products
User’s Manual 3-25
PRINTING AND
PAPER HANDLING
Changing the Paper Tray Size
The paper tray can be adjusted to one of the three paper sizes: A4,
A5, LTR (Letter), and EXE (Executive). If the paper tray is preset
for one of these paper sizes at purchase, however, you cannot adjust
it to the Legal size. To change the size, follow these steps:
1. Remove the paper tray
from the printer.
Refer to the illustration for
the parts you adjust when
changing the size of the
tray.
Labels
This printer prints well on labels if you carefully follow these
guidelines:
• Be careful to use labels under normal operating conditions. Labels
are sensitive to temperature and humidity.
• Use the rear stacker (or that of the duplex unit when your printer
has the duplex unit) so that labels are ejected straight out the back
to minimize curl.
• Use only labels without backing sheets exposed in the printable
area. Labels mounted separately on a backing sheet tend to slip,
resulting in crocked print.
• Test-print labels before using them. If jamming problems occur and
continue, try a different type of label.
Handling Paper
Acceptable
Backing sheet
is not
exposed.
Not acceptable
Backing
sheet is
exposed.
Left guide
Rear guide
Right guide
Paper size
indicator
Label
05 Chapter 3 07.08.1997, 11:40 Uhr25