Filter
Top Products
User’s Manual 6-9
SOLVING
PROBLEMS
6. Install the print unit.
Grasp the print unit by its
green handles with the
green drum surface facing
you.
First, slide straight down
the ends of the drum shaft
along the grooves on the
sides of the printer. Then,
slide the print unit at a 45
degree angle towards the
back of the printer.
Press down gently on the
left and right portions
marked PUSH until the
print unit snaps into
position.
7. Close the upper door.
Before closing the door,
make sure the print unit is
seated properly. Press down
the door until it clicks into
place.
Clearing Paper Jams
08 Chapter 6 07.08.1997, 11:41 Uhr9