Filter
Top Products
4-10 User’s Manual
Adding Paper Sources
Selecting the Ethernet Interface
The printer’s standard interface is parallel. While the Ethernet
interface board is installed, the printer automatically detects that the
computer is using the Ethernet interface.
Ethernet Specifications
The table below shows the physical specifications of the Ethernet
interface.
Specification Description
The span of 10BASE-2 Max. 185 meters
(coaxial, bus connection)
The span of 10BASE-T Max. 100 meters
(twisted-pair, star connection)
Speed of data transmission 10M bits/second
Paper Feeder
If you switch paper sizes frequently, you may want to add a second
paper source. Or you may simply wait to increase the paper capacity
of your printer. You can easily do this by installing an optional paper
feeder which consists of a base frame and a paper tray. The paper tray
in the paper feeder is identified as tray 2 and the one in the basic
configuration is identified as tray 1.
The paper types and sizes used by tray 2 are the same as those for the
standard paper tray. The capacity is 500 sheets of 0.09 mm thick
paper, twice that of the standard paper tray.
Adding Paper
Sources
06 Chapter 4 07.08.1997, 11:41 Uhr10