Filter
Top Products
4-2 User’s Manual
To install the RAM card, first make sure the printer is turned off and
follow these steps:
1. Open the upper door and
right side cover of the
printer. You will see a small
cover on the metal plate.
Remove the fastening screw
and the cover. You can now
see three connectors (upper
two ivory ones for RAM
cards).
2. Orient the RAM card.
Hold the card with the cut
corner down and facing left
and insert the card aslant
into connector.
You can install two memory expansion cards. The expansion card
can have 1, 2, 4, 8, 16, or 32 megabytes of RAM. Together with the
printer’s resident memory of 3 megabytes, these expansion options
offer a range of RAM from 3 to 67 megabytes.
Adding RAM
Insert with cut
facing down and to the left
(8MB card)
* Cover, removed
Use upper two
ivory
connectors
06 Chapter 4 07.08.1997, 11:40 Uhr2