Filter
Top Products
2-6 User’s Manual
MarkVision by Lexmark is an integrated software for managing
printers, stored in the floppy disk labelled “MarkVision” which is
packaged with this manual. It has the following main functions:
• Monitoring the printer
• Displaying the printer status and features (including options) and
statistics
• Providing the printer control panel on the computer’s screen
(Remote control panel)
These functions are most effective and valuable for remote printers in
network environments.
MarkVision is automatically activated when an abnormal condition
occurs in the printer. It operates in Windows 95 environments only.
The remote control panel is quite a nice function that enables you to
easily and remotely operate the printer even if your printer is set up
remotely. MarkVision displays the printer control panel on the
computer’s screen and gives you the exactly same functions as
available with the control panel of the printer. You can perform a
function by clicking a button on the computer’s screen without
pushing a button of the printer’s control panel.
Installing MarkVision
To use MarkVision, your computer and its operating environments
must be as follows:
• IBM PC/AT or compatible or PS/2
• Microsoft Windows 95 (not Windows 3.1/3.11)
• VGA (640 x 400) or higher display
• Hard disk drive installed (5 MB essential for MarkVision)
• 3.5-inch double-sided high density (2HD) floppy disk drive
(1.44 MB)
MarkVision is supplied with three 3.5 inch double-sided high
density (2HD) floppy disks (1.44 MB, 512 bytes/sector). Consult
your dealer when your computer does not have the corresponding
floppy disk drive.
To install MarkVision files and start MarkVision, follow these steps:
Printer Manage-
ment Utility
Program,
Lexmark’s
MarkVision
Printer Management Utility Program, MarkVision
04 Chapter 2 07.08.1997, 11:40 Uhr6