Filter
Top Products
1-12 User’s Manual
Setting Up
Loading Paper and Installing the Paper Tray
This printer has a single paper tray that is preset for letter size (8.5 x 11.0
inches) paper for U.S. customers and to A4 size (210 x 297 mm) paper
for European customers. (You can adjust the paper tray to a different size
paper. See Chapter 3. You can purchase an optional paper tray. See
Chapter 4 and Appendix B.) You should load about 50 sheets of copier
paper to test the printer.
1. Pull the paper tray out of
the printer.
2. Prepare the paper tray.
Remove restraint card board
q and tapes securing the rear
paper guide. Check green
indicator w is positioned
according to the tray size
label (*).
3. Lock the pressure plate. If
the front of the pressure plate
is raised, push it down until
the pressure plate clicks into
place.
4. Widen the side guides.
While bending both side
guides inward q, push their
inner PUSH marks outward
w.
q
*
w
04 Chapter 1 07.08.1997, 11:39 Uhr12