Filter
Top Products
User’s Manual 1-27
GETTING
STARTED
Printing Your First Document
6. Print your document.
Start the program. The default paper size is fixed to A4 (for Europe)
or Letter (for the USA). However, you can print a document on a
different size of paper using the manual feed slot which you can
choose in the Printer Driver’s main window.
Adjusting Print Density
If you feel that the printout is too light or too dark, adjust the print
density by turning the print density dial. It is located inside the top cover
above the control panel. Turning the dial clockwise darkens the print. A
counterclockwise adjustment lightens the print. After making the
adjustment, close the top cover, print your trial document again, and
check the results.
Darken
Lighten
Print density dial
If you see a problem with the printed pages other than print density, see
Chapter 6 for possible causes and solutions.
If your document printed successfully, skip the next subsection If
Something Goes Wrong.
04 Chapter 1 07.08.1997, 11:39 Uhr27