Filter
Top Products
3-16 User’s Manual
*5 Displayed when soft fonts are downloaded or a font SIMM card is
installed
*6 Displayed when the selected font is a scalable and fixed-spacing one
*7 Displayed when the selected font is a scalable and proportional-
spacing one
*8 Effective when PCL jobs are being executed. These values are used
as defaults of top and left offset specifications in PCL mode.
*9 Displayed when the FPS is selected for personality
*10 If the total capacity of memory is 3M to 9M bytes with banding
mode off, the resolution is automatically set to 300 dpi. When
intending to print at 600 dpi, select “banding mode on” or install
additional memory cards of 6M bytes or more.
*11 This is essential for sharing the printer among multiple computers.
*12 This is for the parallel interface.
*13 Displayed when a serial interface board is installed
*14 Displayed when a network interface board is installed
*15 Consists of four parameters. The one followed by < can be changed.
The following briefly explains each item of the menu mode.
Menu Items
Page format menu
Copies The number of copies the printer prints from
each page
Paper/Envelope A paper size or envelope size to be used by the
printer
Orientation A printing direction
Form lines The number of lines printed per page
Page protect Whether a block of printer memory is reserved
exclusively for text and graphics data,
especially for printing dense text or complex
graphics, to prevent memory overflow errors.
However, it reduces the amount of printer
memory available for downloadable fonts.
Duplex mode Two-sided printing mode
Binding Where an extra area for fastening pages is
located, short or long edge of a page
Menu Items
05 Chapter 3 07.08.1997, 11:40 Uhr16