Filter
Top Products
95
Chapter 5: Installing Pattern Generator Measurement Modules
16720A Pattern Generator (5-card module)
16720A Pattern Generator (5-card module)
NOTE: Turn off the mainframe power before removing, replacing, or installing
modules following the procedures on page 42.
1 Carefully slide the 4 cards half way into the mainframe slots.
2 Use six 2 x 10 cables to connect the modules. Cable the bottom two
Expander Cards to the Master Card first. Then cable the upper two
Expanders to the Master Card.
3 Gently slide the cabled assembly fully into the frame and tighten the
thumb screws.
Expander
Expander
Master
Expander
Expander
2x10
C
able