Filter
Top Products
Bootp Server Configuration
Bootp Server Setup on a PC
83
1. Skip this step if you only have one LAN interface in your system (the
following screen will not be displayed.) Specify the driver that will be used
for the Bootp server. This is an example; your driver may be different.
2. The final screen looks like the following:
3. Modify the sample bootptab configuration file and restart your computer
before running the Bootp software.
Bootp Installation for Microsoft LAN Manager:
=============================================
Setup has found multiple drivers that it can bind the
bootp software to.
Choose one of the following:
0: AgilentLAN
1: AgilentLANB
2: Exit this setup program
Enter number [0 - 2]:
The following file has been copied to the directory
C:\LANMAN.DOS\:
- DISPKT10.DOS
The CONFIG.SYS and the PROTOCOL.INI files have been
modified. Unmodified backups have been saved as
C:\CONFIG.BTP and C:\LANMAN.DOS\PROTOCOL.BTP.
The following files have been copied to the directory
C:\BOOTPD:
- BOOTPD.EXE
- BOOTPTAB
- README.TXT
BOOTPTAB is a sample configuration file which you must
modify before executing BOOTPD.EXE.
Bootp Setup is complete.
Please read the README.TXT file for additional
information. You will need to restart your computer
before running the Bootp software.