Filter
Top Products
Download New Firmware
100
Download New Firmware
The instructions in this chapter describe how to download new firmware to the
Agilent J3919A and J3972A OC-3 ATMProbes.
This download procedure is only necessary to upgrade your probe firmware to a
new firmware release.
New firmware for the probe comes in the form of a binary file. This binary file
can be received in the following ways:
Sent to you by an Agilent Support Representative, on 3.5-inch floppy disk.
Sent to you by an Agilent Support Representative via electronic means.
Included with NetMetrix.
Obtained via anonymous ftp from col.hp.com (15.255.240.16). The
/dist/netmetrix/lpfirmware
directory contains the latest
firmware versions for Agilent probes. A README file in this directory
provides more details about the files contained in the
lpfirmware
directory.
CAUTION
Downloading new probe firmware resets stored probe data and some probe
configuration information (like filters, traps, and channels). It can affect the IP
address, subnet mask, or default gateway IP address in some situations. Refer to
the README file on the new firmware media for more information.
The available procedures for downloading new firmware to the probe are
documented in this chapter. You should first select a procedure and then go to that
section in this chapter and execute that procedure.