Filter
Top Products
Local Terminal Configuration
Using a Local Terminal
25
Modify/View Interface Values
After you access the Modify/View Interface Values menu, you must first select the
port that you want to configure and then configure that port. For example, the
possible options for the port parameter could be the following:
[1] 1.1/Ethernet
[2] 1.2/Serial
[3] 3.1/ATM
[4] 3.1/ATM-AL5
[5] 3.1/STS3C-STM1
The Modify/View Interface Values section is divided into the following topics.
Refer to the desired topic to modify or view your specific interface values.
“Fast Ethernet Telemetry Interface Configuration” below
“Token-Ring Telemetry Interface Configuration” on page 29
“OC-3 ATM Interface Configuration” on page 33
Fast Ethernet Telemetry Interface Configuration
Use the following procedure to configure items in the Modify/View Interface
Values menu for the Fast Ethernet Telemetry Interface:
1. Press
3
to access the
Modify/View interface values
menu item. The
Modify/View Interface Values menu is displayed, as shown in Figure 2-5 on
page 26.