Filter
Top Products
Bootp Server Configuration
Bootp Server Setup on a PC
84
Using Novell NetWare
If you have selected
Microsoft LAN Manager 1.0 or later
, go back to “Using
Microsoft LAN Manager” on page 82.
If you have selected
Novell NetWare v3.1 or later
from the setup menu, use the
following procedure to setup your Bootp installation.
1. Press return to continue from the following screen.
2. Specify the location of the NET.CFG file. The default is for the NET.CFG
file to be located at C:\NOVELL\NET.CFG.
Bootp Installation for Novell networks:
=======================================
In order to use this product using the NetWare protocols,
you need to be running client versions of NetWare that
include:
- LSL.COM v1.20 or later
Your NET.CFG file must specify a FRAME type of
ETHERNET_II. For example, your NET.CFG should include
something like:
LINK DRIVER AgilentWDSA8
FRAME ETHERNET_II
Bootp also requires that you do not have Novell TCP/IP
software (LAN Workplace for DOS) installed.
(Press return to continue or ‘E’ to Exit.)
Setup could not find the NET.CFG file.
Please specify a full path and filename
(e.g. C:\NOVELL\NET.CFG):