Filter
Top Products
Bootp Server Configuration
Probe Configuration Using a Bootp Server
76
Table 4-1: Minimum Requirements for a Bootp Server
* Although bootp is supported on many versions of HP-UX and Solaris, the
NetMetrix application is only supported on specific operating system releases.
Refer to your NetMetrix documentation for the list of supported operating system
releases.
Item
Bootp Server type
HP Sun PC
Model or Processor HP 9000
Model 700
or 800
Sun SPARC Model
1, 1+, 2, IPC, 5, 10,
20
286 or above
Operating System HP-UX 9.x
or later*
Solaris 2.1 or
later*
DOS 3.0 or later
Network Operating
System/Subsystem
ARPA
Berkeley
Services
Sun Networking
Services (Ethernet
and TCP/IP)
Microsoft LAN Manager
1.0 or later
-or-
Novell NetWare
environment, including
LSL.COM v1.2,
IPXODI.COM v1.2,
NETX.COM v3.1
or later
Floppy Drive Not
Applicable
Not Applicable 3.5-inch Floppy Disk
Drive
System Memory Not
Applicable
Not Applicable 10KB of free memory to
run the installation
process. 100 KB of free
memory to run
BOOTPD.