Alcatel Carrier Internetworking Solutions 6648 Switch User Manual


 
Advanced Link Aggregation Troubleshooting Troubleshooting Link Aggregation
page 7-8 OmniSwitch Troubleshooting Guide September 2005
MAC=00:d0:95:6b:54:0c name=
primary_port_index=0 admin_state=1 oper_state=2
Individual=0
Actor : ID=00:00:00:00:00:00 Prio=0 Admin Key=0 Oper Key=2
Partner : ID=00:00:00:00:00:00 Prio=0 Admin Key=0 Oper Key=2
0x04442ea8 status=6 ifindex=8001 port_id=224 port_type=1 port_index=0
adminstate=1 operstate=1 link_up_down=1
activation_order=1 bandwidth=100 agg_ctx_p=0x0443a958
agg_port_ctx_p=0x04442ea8 obj_port_ctx_p=0x04442d30
0x04442c20 status=6 ifindex=8002 port_id=225 port_type=1 port_index=1
adminstate=1 operstate=1 link_up_down=1
activation_order=2 bandwidth=100 agg_ctx_p=0x0443a958
agg_port_ctx_p=0x04442c20 obj_port_ctx_p=0x04444090
3 -> 0x0443c090 ifindex=40000003 id=3 type=0 max_size=2 selected=2 reserved=2 a
ttached=2
MAC=00:d0:95:87:a5:f2 name=
primary_port_index=0 admin_state=1 oper_state=2
0x04443288 status=6 ifindex=7001 port_id=204 port_type=0 port_index=0
adminstate=1 operstate=1 link_up_down=1
activation_order=1 bandwidth=1000 agg_ctx_p=0x0443c090
agg_port_ctx_p=0x04443288 obj_port_ctx_p=0x0443e818
0x0443e7d0 status=6 ifindex=7002 port_id=220 port_type=0 port_index=1
adminstate=1 operstate=1 link_up_down=1
activation_order=2 bandwidth=1000 agg_ctx_p=0x0443c090
agg_port_ctx_p=0x0443e7d0 obj_port_ctx_p=0x04442fa0
value = 84125696 = 0x503a800
To understand the output better, note that help is available in nidebug Dshell with the command
la_ni_info.
-> dshell
Working: [Kernel]->NiDebug
:0 nidbg> la_ni_info
7:0
7:0 LAGG values translation BOOL TRUE(1) FALSE(0)
7:0 NO CONFIG(0) CONF_NOT_SAVE(0x1) CONF_SAVED(0x2) CONF_CERTIFIED(0x4)
7:0 PORT_STATUS CREATED(1) CONFIGURABLE(2) CONFIGURED(3) SELECTED(4)
RESERVED(5) ATTACHED(6)
7:0 AGGREGABLE_STATUS NS(0) NOT_AGGREGABLE(1) AGGREGABLE(2)
7:0 TOKEN MSGTYPE NS(0) TRANSIT(1) TRANSIT_RSP_NOK(2) JOIN(3) DYN_DATA_REQ(4) D
YN_DATA_RSP_OK(5) DYN_DATA_RSP_NOK(6)
7:0 TOKEN STATE IDLE(0) UPDATE(1) PASSIVE(2) READY(3) REQUEST(4) GOT(5)
7:0 value = 0 = 0x0
To look at traffic statistics per aggregate use the command la_cmm_agg_stats_prt ifindex Dshell
command.
-> dshell
Working: [Kernel]->la_cmm_agg_stats_prt 40000003
Aggregate Statistics [40000003]
agg_nb_octets_rx_ok = 0
agg_multicast_frm_rx_ok = 0
agg_broadcast_frm_rx_ok = 0
agg_unicast_frm_rx_ok = 0
agg_frm_discard_rx = 0
agg_frm_with_rx_errors = 0
agg_unknown_protocol_frms = 0
agg_nb_octets_tx_ok = 0