Filter
Top Products
RIP Troubleshooting Troubleshooting IP Routing
page 12-16 OmniSwitch Troubleshooting Guide September 2005
error Includes error conditions, failures, processing errors, etc.
warning Includes general warnings, non-fatal conditions.
recv Enables debugging in the receive flow path of the code.
send Enables debugging in the send flow path of the code.
rdb Debugs RIP database handling.
age Debugs code handling database entry aging/timeouts.
redist Debugs redistribution code.
info Provides general information.
setup Provides information during initialization.
time Debugs timeout handler.
all Enables all debug options.
Any combination of debug-types can be set.
Lets look at all the RIP debug messages by using the option all:
-> ip rip debug-type all
-> ip rip debug-level 255
tRip-: processRipNetQueue: Enter.
tRip-: processRipNetQueue: Received RIP packet:24
tRip-: ripRecv:Received packet from 11.40.211.4
tRip-: ripRecv:Received my own packet on VLAN 2
tRip-: processRipNetQueue: Received RIP packet:244
tRip-: ripRecv:Received packet from 11.40.211.1
tRip-: ripRecv: Rx: RESP ver=v1 src=11.40.211.1 inIf=11.40.211.4 port=520
tuples=12 len=244
(Received RIP packet from interface 11.40.211.1, version 1 with 12 routes.)
tRip-: ripPeerLookupEntry: looking for peer->11.40.211.1
tRip-: ripPeerAddEntry: Adding Peer->11.40.211.1 to PeerTable
tRip-: ripPeerLookupEntry: looking for peer->11.40.211.1
tRip-: ripPeerRefreshAgeoutTimer: peer->11.40.211.1 age set to 68
tRip-: ripPeerLookupEntry: looking for peer->11.40.211.1
(Looking in peer table, if the peer 11.40.211.1 already exists or not.)
tRip-: in ripRdbLookup for 0.0.0.0 (0.0.0.0)
tRip-: Adding 0.0.0.0/0->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 6.0.0.0 (255.0.0.0)
tRip-: Adding 6.0.0.0/8->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 8.0.0.0 (255.0.0.0)
tRip-: Adding 8.0.0.0/8->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 10.10.41.57 (255.255.255.255)
tRip-: Adding 10.10.41.57/32->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 10.10.42.57 (255.255.255.255)
tRip-: Adding 10.10.42.57/32->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 10.10.42.159 (255.255.255.255)
tRip-: Adding 10.10.42.159/32->11.40.211.1 to FIB
tRip-: in ripRdbLookup for 11.40.1.0 (255.255.255.0)