Filter
Top Products
Troubleshooting 802.1Q Advanced Troubleshooting
OmniSwitch Troubleshooting Guide September 2005 page 8-5
Advanced Troubleshooting
To verify the 802.1Q configuration from the CMM perspective use the debug 802.1q CLI command.
If frame type is set to all, then the egress default VLAN will equal the ports default VLAN. If force tag
internal is set to off, e.g. force tag internal will equal 0, otherwise it will be ffffffff.
The following shows the debug 802.1q CLI command used to verify that the slot and port are up.
-> debug 802.1q 5/24
Slot Status = slot up
Port Status = port up
GENERAL INFO ESM: USER PORT 1-12 = CORONADO PORT 0-11
GENERAL INFO ESM: USER PORT 13-24 = CORONADO PORT 16-27
GENERAL INFO GSM-2: USER PORT 1 = CORONADO PORT 12
GENERAL INFO GSM-2: USER PORT 2 = CORONADO PORT 28
GENERAL INFO GSM-8: USER PORT 1 = CORONADO PORT 0
GENERAL INFO GSM-8: USER PORT 2 = CORONADO PORT 16
GENERAL INFO GSM-8: USER PORT 3 = CORONADO PORT 1
GENERAL INFO GSM-8: USER PORT 4 = CORONADO PORT 17
GENERAL INFO GSM-8: USER PORT 5 = CORONADO PORT 2
GENERAL INFO GSM-8: USER PORT 6 = CORONADO PORT 18
GENERAL INFO GSM-8: USER PORT 7 = CORONADO PORT 3
GENERAL INFO GSM-8: USER PORT 8 = CORONADO PORT 19
HARDWARE INFO for slot = 5 and port = 24:
At reg_addr = 660012c, Ingress tag-untag:= 8000000:
At reg_addr = 6a00010, Eg tag-untag: = 8000000:
At reg_addr = 660106c,for protocol = 0,ing default vlan: = a
At reg_addr = 66010ec,for protocol = 1,ing default vlan: = a
At reg_addr = 660116c,for protocol = 2,ing default vlan: = a
At reg_addr = 66011ec,for protocol = 3,ing default vlan: = a
At reg_addr = 660126c,for protocol = 4,ing default vlan: = a
At reg_addr = 66012ec,for protocol = 5,ing default vlan: = a
At reg_addr = 660136c,for protocol = 6,ing default vlan: = a
At reg_addr = 66013ec,for protocol = 7,ing default vlan: = a
At reg_addr = 660146c,for protocol = 8,ing default vlan: = a
At reg_addr = 66014ec,for protocol = 9,ing default vlan: = a
At reg_addr = 660156c,for protocol = a,ing default vlan: = a
At reg_addr = 66015ec,for protocol = b,ing default vlan: = a
At reg_addr = 660166c,for protocol = c,ing default vlan: = a
At reg_addr = 66016ec,for protocol = d,ing default vlan: = a
At reg_addr = 660176c,for protocol = e,ing default vlan: = a
At reg_addr = 66017ec,for protocol = f,ing default vlan: = a
At reg_addr = 6a7006c, egress default vlan: = a
At reg_addr = 6600118, protocol cam on/off: = 0 :
At reg_addr = 660011c, trusted/untrusted: = 0
At reg_addr = 6600130, secure/unsecure: = 0
At reg_addr = 6608078, for vlan = 1e,spanning tree vector: = 8000000
At reg_addr = 66080a0, for vlan = 28,spanning tree vector: = 8000000
At reg_addr = 66080c8, for vlan = 32,spanning tree vector: = 8000000
At reg_addr = 6a00014, Eg force tag internal: = ffffffff: