Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -29
ip pimsm debug-level
Defines the level of PIM-SM debug messages that are generated.
ip pimsm debug-level level
Syntax Definitions
level Specifies the PIM-SM debug level (0–255). Higher debug-levels will
include all messages that correspond to a lower value. For example, a
debug-level of 1 will display only those messages that are defined with
a level of 1; however, a debug level of 2 will display all messages of
level 1 and level 2, etc. Higher levels will display detailed messages;
lower levels will display basic messages.
Defaults
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
When the debug level is set to 0, PIM-SM debug logging is turned off.
Examples
-> ip pimsm debug-level 2
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
ALAPIMSMDEBUGCONFIG
alaPimsmDebugLevel
parameter default
level 1
ip pimsm debug-type Configures the type(s) of PIM-SM debug messages to display.
show ip pimsm debug Displays the current PIM-SM debug levels and types.