Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -31
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
• The message-types specified in the command line will only be displayed if the debug level has been set
to a number greater than zero (i.e., 1–255). For information on specifying the debug level, refer to the
ip pimsm debug-level command on page B-29.
• The syntax all can be used to easily turn on/off all message types (e.g., ip pimsm debug-type all or
no ip pimsm debug-type all).
Examples
-> ip pimsm debug-type all
-> ip pimsm debug-type bootstrap assert
-> no ip pimsm debug-type all
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
ALAPIMSMDEBUGCONFIG
alaPimsmDebugAll
alaPimsmDebugAssert
alaPimsmDebugBootstrap
alaPimsmDebugCRP
alaPimsmDebugError
alaPimsmDebugHello
alaPimsmDebugIgmp
alaPimsmDebugInit
alaPimsmDebugIpmrm
alaPimsmDebugJoinPrune
alaPimsmDebugMip
alaPimsmDebugMisc
alaPimsmDebugNbr
alaPimsmDebugRoute
alaPimsmDebugSpt
alaPimsmDebugTime
alaPimsmDebugTm
ip pimsm debug-level Defines the level of PIM-SM messages that are generated.
show ip pimsm debug Displays the current PIM-SM debug levels and types.