Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -167
debug vlan rule communication
Displays the communication of the Chassis Management Module (CMM) with all the software modules
and all Network Interface (NI) modules for synchronizing the rules configured on the CMM.
debug vlan rule communication
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
• GlobSlice indicates the slot number.
• If an NI is not present in the chassis then the state will appear as dead.
• The state field should always be RX (received) or CFGD (configured) but should never be dead for
any module that exists in the NI. Dead will indicate that the module is not working properly.
Examples
-> debug vlan rule communication
VlnMgr skt=0x75 rapp=8 rsnp=3 CNXN-OR state:RX
CSping skt=0x73 rapp=64 rsnp=6 CNXNLESS state:RX
CfgMgr skt=0x74 rapp=66 rsnp=3 CNXNLESS state:RX
CLI skt=0x74 rapp=67 rsnp=67 CNXNLESS state:RX
SNMP skt=0x74 rapp=68 rsnp=4 CNXNLESS state:CFGD
WbView skt=0x74 rapp=69 rsnp=2 CNXNLESS state:CFGD
PrtMgr skt=0x76 rapp=65 rsnp=0 CNXNLESS state:RX
CSniev skt=0x73 rapp=64 rsnp=3 CNXNLESS state:RX
GMAP skt=0x77 rapp=19 rsnp=6 CNXN-OR state:RX
PSM skt=0x78 rapp=81 rsnp=1 CNXN-OR state:RX
SrcLrn skt=0x79 rapp=10 rsnp=1 CNXN-OR state:CFGD
MpGate skt=0x74 rapp=70 rsnp=3 CNXNLESS state:RX
AAA_AVLAN skt=0x7a rapp=20 rsnp=1 CNXN-OR state:CFGD
AAA_ONEX skt=0x7b rapp=91 rsnp=3 CNXN-OR state:CFGD
GlobSlice: 0 skt=0x130 rslot=1 rslice=0 rapp=9 rsnp=2 CNXNLESS
state:RX
GlobSlice: 1 skt=0x130 rslot=2 rslice=0 rapp=9 rsnp=2 CNXNLESS
state:RX
GlobSlice: 2 skt=0x0 rslot=0 rslice=0 rapp=0 rsnp=0 CNXN-OR
state:DEAD
GlobSlice: 3 skt=0x130 rslot=4 rslice=0 rapp=9 rsnp=2 CNXNLESS
state:RX
GlobSlice: 4 skt=0x0 rslot=0 rslice=0 rapp=0 rsnp=0 CNXN-OR
state:DEAD