Filter
Top Products
OmniSwitch Troubleshooting Guide September 2005 page -207
Output fields are described here:
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
N/A
output definitions
Event The event for which kTrace log information is displayed.
Timestamp The timestamp for the kTrace log information being displayed. Values
can range from 0x00000000 through 0xffffffff.
AppID The Application ID (subsystem) for which kTrace log information is
displayed. Values can range from 0x00 through 0xff.
Level The Severity Level for which kTrace log information is displayed.Val-
ues include off (1), alarm (2), error (3), alert (4), warning (5), info (6)
(default) debug1 (7), debug2 (8), and debug3 (9).
Task ID The Task for which kTrace log information is displayed.
Caller The address of the function containing the call that logged the event.
debug ktrace Enables or disables kTrace logging.
debug ktrace appid level Adds or removes a kTrace capture level for a specified subsystem.
debug ktrace show Displays current kTrace parameters.
debug systrace Enables or disables sysTrace logging.
debug systrace watch Enables or disables sysTrace log output to the console.
debug systrace appid level Adds or removes a sysTrace capture level for a specified subsystem.
debug systrace show Displays sysTrace debug log information.
debug systrace show log Displays the sysTrace log.
show log pmd Displays the contents of a stored Post Mortem Dump (PMD) file.