Filter
Top Products
AT-9000 Switch Command Line User’s Guide
1053
“NO LLDP MED-TLV-SELECT” on
page 1083
Port Interface Stops ports from transmitting specified
LLDP-MED TLVs.
“NO LLDP NOTIFICATIONS” on
page 1085
Port Interface Prevents ports from sending LLDP
SNMP notifications (traps).
“NO LLDP RUN” on page 1086 Global
Configuration
Disables LLDP on the switch.
“NO LLDP TLV-SELECT” on
page 1087
Port Interface Stops ports from sending optional
LLDP TLVs to their neighbors.
“NO LLDP TRANSMIT RECEIVE” on
page 1088
Port Interface Stop ports from transmitting and/or
accepting LLDP advertisements.
“NO LOCATION” on page 1089 Port Interface Removes LLDP-MED location
information from the ports on the
switch.
“SHOW LLDP” on page 1091 Privileged Exec Displays general LLDP settings.
“SHOW LLDP INTERFACE” on
page 1093
Privileged Exec Displays the LLDP port settings.
“SHOW LLDP LOCAL-INFO
INTERFACE” on page 1095
Privileged Exec Displays the current configurations of
the LLDP advertisements that the
ports on the switch can transmit to
LLDP-compatible neighbors.
“SHOW LLDP NEIGHBORS DETAIL”
on page 1097
Privileged Exec Displays detailed information the
switch has collected from its LLDP-
compatible neighbors.
“SHOW LLDP NEIGHBORS
INTERFACE” on page 1102
Privileged Exec Displays a summary of the information
gathered by the switch from its LLDP-
compatible neighbors.
“SHOW LLDP STATISTICS” on
page 1104
Privileged Exec Displays the LLDP statistics for the
entire switch.
“SHOW LLDP STATISTICS
INTERFACE” on page 1106
Privileged Exec Displays the LLDP statistics for the
individual ports.
“SHOW LOCATION” on page 1108 Privileged Exec Displays the civic, coordinate, and
ELIN location entries on the switch.
Table 100. LLDP and LLDP-MED Commands (Continued)
Command Mode Description