AT-9000 Switch Command Line User’s Guide
971
NO SNMP-SERVER
Syntax
no snmp-server
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable SNMPv1, SNMPv2c, and SNMPv3 on the
switch. The switch does not permit remote management from SNMP
applications when SNMP is disabled. It also does not send SNMP trap or
inform messages.
Confirmation Command
“SHOW SNMP-SERVER” on page 978.
Example
This example disables SNMPv1, SNMPv2c, or SNMPv3 on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server