Chapter 63: SNMPv1 and SNMPv2c Commands
960
SNMP-SERVER
Syntax
snmp-server
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate SNMPv1, SNMPv2c and SNMPv3 on the
switch. The switch permits remote management from SNMP applications
when SNMP is enabled. The switch also sends SNMP messages to trap
and inform receivers.
Confirmation Command
“SHOW SNMP-SERVER” on page 956
Example
This example activates SNMPv1, SNMPv2c or SNMPv3 on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server