Filter
Top Products
AT-9000 Switch Command Line User’s Guide
1349
CRYPTO CERTIFICATE GENERATE
Syntax
crypto certificate
id_number
generate
length passphrase
common_name organizational_unit organization location state
country duration
Parameters
id_number
Specifies a certificate ID number. The range is 0 to 10. A certificate
must be assigned an ID number that is unique from the ID numbers
of all other certificates already on the switch.
length
Specifies the length of the encryption key in bits. The range is 512
to 1536 bits. The default is 512 bits.
passphrase
Specifies a passphrase, used to export the certificate in PKCS12
file format. This parameter must be from 4 to 20 characters.
Spaces and special characters are not allowed. (Even though the
switch does not permit the export of certificates, a passphrase is
still required in the command.)
common_name
Specifies a common name for the certificate. This should be the IP
address or fully qualified URL designation of the switch. This
parameter can have up to 64 characters. Spaces and special
characters are not allowed.
organizational_unit
Specifies the name of a department, such as Network Support or
IT. This parameter can have up to 64 characters. Spaces and
special characters are not allowed.
organization
Specifies the name of a company. This parameter can have up to
64 characters. Spaces and special characters are not allowed.
location
Specifies a location of the switch. This parameter can have up to
64 characters. Spaces and special characters are not allowed.
state
Specifies a state, such as California or Nevada. This parameter
can have up to 64 characters. Spaces and special characters are
not allowed.