AT-9000 Switch Command Line User’s Guide
175
FCTRLLIMIT
Syntax
fctrllimit
fctrllimit
Parameters
fctrllimit
Specifies the number of cells for flow control. A cell represents 128
bytes. The range is 1 to 7935 cells. The default value is 7935 cells.
Mode
Port Interface mode
Description
Use this command to specify threshold levels for flow control on the ports.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 130
Example
This example sets the threshold level for flow control on port 14 to 5000
cells:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.14
awplus(config-if)# fctrllimit 5000