Filter
Top Products
Chapter 3: Installing the Hardware
76
Caution
Do not force AT-StackXG module into place. Doing so may damage
the connector pins on the backplane inside the chassis. If there is
resistance, remove the module and reinsert it after verifying that the
edges of the card are properly aligned in the guides in the chassis’
module slot.
Figure 37. Installing the AT-StackXG Stacking Module
4. Secure AT-StackXG module to the chassis by tightening the two
captive screws with a cross-head screwdriver.
Figure 38. Securing the AT-StackXG Stacking Module
1242
A
T-LX
44CPUCV
R
AT-StackXG
Stack Po
rt 1
Stack Po
rt 2
1243
A
T
-LX44CPUCVR
AT-StackXG
Stack Port 1
Sta
ck Port 2