Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
C613-50031-01 REV B AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later 107
type atmf node
This command configures a trigger to be activated at an AMF node join or leave event.
Syntax type atmf node {join|leave}
Mode
User Exec - Privilege level 15
Example-1 To configure trigger 5 to activate at an AMF node leave event, use the following
commands. In this example the command is entered on node-1:
Example-2 The following commands will configure trigger 5 to activate if an AMF node join event
occurs on any node within the working set:
This command returns the following display:
Note that the running the above command changes the prompt from the name of the
local node, to the name of the AMF-Network followed, in square brackets, by the number
of member nodes in the working set.
Parameter Description
type Configure a particular type of trigger
atmf Manage AMF feature
join AMF node join event
leave AMF node leave event
node1(config)#
trigger 5
node1(config-trigger)
type atmf node leave
node1#
atmf working-set group all
====================
node1, node2, node3:
====================
Working set join
AMF-Net[3]#
conf t
AMF-Net[3](config)#
trigger 5
AMF-Net[3](config-trigger)#
description description “E-mail on
AMF Exit”
AMF-Net[3](config-trigger)#
type atmf node leave
AMF-Net[3](config-trigger)#
active