Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
80 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
show atmf
Displays information about the current AMF node.
Syntax show atmf [detail|summary|tech|nodes|session]
Default Only summary information is displayed.
Mode User Exec and Privileged Exec
Usage AMF uses internal VLANs to communicate between nodes about the state of the AMF
network. Two VLANs have been selected specifically for this purpose. Once these have
been assigned, they are reserved for AMF and cannot be used for other purposes
Example 1 To show summary information on AMF node_1 use the following command:
The following figure shows some example output from running this command for a
specific AMF node.
Parameter Description
detail Displays detailed information about the current AMF node.
summary Displays summary information about the current AMF node.
tech Displays global AMF information.
nodes Displays information about AMF network nodes.
session Displays information on an AMF session.
node_1
show atmf summary
Figure 1-1: Output from the show atmf summary command
node_1#show atmf
ATMF Summary Information:
ATMF Status : Enabled
Network Name : ATMF_NET
Node Name : node_1
Role : Master
Current ATMF Nodes : 8