Filter
Top Products
AMF network guidelines
Page 16 | How to Configure and Use AMF on Allied Telesis Switches
Working-sets
An AMF working-set is a set of nodes, which is either arbitrarily user defined, or one of the
pre-defined working-set groups (see "Working-set groups" on page 38). Specifying or
selecting a working-set allows CLI commands to be executed on all nodes within the
selected working-set with a single command. A working-set can be defined, selected and
configured from any node within an AMF network.
Figure 3: AMF working-set containing nodes Master1, Member1, Member2, and Member6
AMF network guidelines
Retention and use of the ‘manager’ username
The default username for an Alliedware Plus login is manager, with a documented default
password. Users should change this password on all their nodes to provide login security. In
order to centrally manage nodes undergoing automated node recovery, or to expand the
network by adding a new unconfigured node, it will be necessary to login with the default
manager username.
It is possible to add new usernames and passwords to nodes, but to retain the ability to
centrally manage the network, usernames should be uniformly configured across all AMF
nodes within the AMF network.
Master 1
Member 1
AMF
working-set
Master 2
Member 2
Member 6
Member 5
Member 4
Member 3
AMF Network