Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
50 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
AMF Naming Convention
When AMF is enabled on a switch, it will automatically be assigned a host name. If a host
name has already been assigned, by using the command hostname, this will remain. If
however, no host name has been assigned, then the name applied will be the prefix, host_
followed (without a space) by the MAC address of the device. For example, a device whose
MAC address is 0016.76b1.7a5e will have the name host_0016_76b1_7a5e assigned to it.
To efficiently manage your network using AMF, we strongly advise that you devise a
naming convention for your network switches, and accordingly apply an appropriate
hostname to each switch in your AMF network.