Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
76 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
Example-1 To add all nodes in the AMF to the working-set, use the command:
Displays an output screen similar to the one shown below:
Example-2 To return to the local prompt, and connectivity to only the local node; use the command:
node1#
atmf working-set group all
Note
This command adds the implicit group “all” to the working set; where “all”
comprises all nodes in the AMF.
=========================================
node1, node2, node3, node4, node5, node6:
==============================================
Working set join
ATMF_NETWORK_Name[6]#
ATMF_NETWORK_Name[6]#
atmf working-set group local
node1#
Parameter definitions from the working-set command
Parameter Definition
node1, node2 etc The name of the nodes - as set by the hostname command.
ATMF_Network_Name The name of the AMF network - as set by the atmf network-name
command on page 68.
[6] The number of nodes in the working-set.